Tor Anders Hauge

Denne side på engelsk

Førsteamanuensis II Tor Anders Hauge Email: thauge@xstratanickel.no Rom: 305 (kun tirsdager) Mobil tlf: 4888 1311 Fax: 3725 3001 Adresse: Fakultet for teknologi og realfag Universitetet i Agder, Serviceboks 509, 4898 Grimstad

Bakgrunn:
2008-: Førsteamanuensis II Universitetet i Agder innen Industriell IT
2003-: Senior Ingeniør Xstrata Nikkelverk, Kristiansand
1999-2002: Stipendiat ved Høgskolen i Telemark / NTNU Kybernetikk
1997-1999: Siv.Ing ved Høgskolen i Telemark, Teknologiske Fag

Forelesning/Veiledning:
Veileder MAS302 og MAS500 hovedprosjekt i bedriften Xstrata Nikkelverk, Kristiansand

MT-602 Avansert Reguleringsteknikk og Robotikk (PhD nivå) og MAS400 Industriell IT (Master nivå)

Avhandlinger:

2) Hauge, T.A. (2003). Roll-out of Model Based Control with Application to Paper Machines, Dr.ing Thesis 2003:31, NTNU and Telemark University College, ISBN 82-471-5581-8.

1) Hauge, T.A. (1999). Parameter Estimation in Mechanistic Models, MSc Thesis, Telemark University College.

Tidsskriftsartikler:

4) Hauge, T.A., Løkling, R. and Haga, S. "Past, Present and Future of Process Control at Xstrata Nikkelverk", Modeling, Identification and Control, Vol 30, No 3, pp. 157-165, 2009.

3) Hauge, T.A., Slora, R., and Lie, B. (2005). Application and roll-out of infinite horizon MPC employing a nonlinear Mechanistic Model to paper machines, Journal of Process Control, 15, p 201-215.

2) Lie, B., Dueñas Diez, M., and Hauge, T.A. (2005). A Comparison of Implementation Strategies for MPC, Modeling, Identification and Control, 26(1), p 39-50.

1) Hauge, T.A. and Lie, B. (2002). Paper Machine Modeling at Norske Skog Saugbrugs: A Mechanistic Approach, Modeling, Identification and Control, 23(1), p 27-52. (a condensed and updated version of the conference paper which appeared in the SIMS 2001 proceedings).

Konferanseartikler:

9) Alic, M., Hauge, T.A., and Lie, B. (2009). Developing a Simple Modelica Library for Simulation of the Xstrata Nikkelverk Copper Production Plant, In proceedings from the SIMS Simulation Conference, October 7-8, Fredericia, Denmark. ISBN 978-87-89502-88-5

8) Komperød, M., Hauge, T.A., and Lie, B. (2008). Empirical modeling: Approximating the DSR E sub-space system identification method using two-step ARX identification, Accepted at the SIMS Simulation Conference, October 7-8, Oslo, Norway.

7) Komperød, M., Hauge, T.A., and Lie, B. (2008). Preprocessing of experimental data for use in modeling and model validation, Accepted at the SIMS Simulation Conference, October 7-8, Oslo, Norway.

6) Lie, B. and Hauge, T.A. (2008). Modeling of an industrial copper leaching and electrowinning process, with validation against experimental data, Accepted at the SIMS Simulation Conference, October 7-8, Oslo, Norway.

5) Lie, B., Dueñas Diez, M., and Hauge, T.A. (2002). A Comparison of Implementation Strategies for MPC, In proceedings of International Symposium on Advanced Control of Industrial Processes, June 10-11, Kumamoto, Japan.

4) Hauge, T.A., Slora, R. and Lie, B. (2002). Model Predictive Control of a Norske Skog Saugbrugs Paper Machine: Preliminary Study, in proceedings of Control Systems 2002, June 3-5, 2002, Stockholm, Sweden, p 75-79.

3) Hauge, T.A. and Lie, B. (2001). Paper Machine Modeling at Norske Skog Saugbrugs: A Mechanistic Approach, in proceedings of the 42nd SIMS Simulation Conference, October 8-9, 2001, Telemark University College, Porsgrunn, Norway, p 119-154.

2) Hauge, T.A., Ergon, R., Forsland, G.O., Slora, R. and Lie, B. (2000). Modeling, Simulation and Control of Paper Machine Quality Variables at Norske Skog Saugbrugs, Norway, in proceedings of the PIRA conference "Scientific & Technological Advances in the Measurement & Control of Papermaking", December 11-12, 2000, Edinburgh, UK. (Slides)

1) Hauge, T.A. and Lie, B. (2000). Simulation for Advanced Control of a Paper Machine: Model Complexity and Model Reduction, in proceedings of the 41st SIMS simulation Conference, September 18-19, 2000, Technical University of Denmark, Kgs. Lyngby, Denmark, p 135-154. (Slides)

Rapporter:

5) Hauge, T.A. and Lie, B. (2002). Stabilization of the Wet End at PM6. Part 3: Modeling, Model Fitting, and Tuning of a Kalman Filter at PM6, Norske Skog Saugbrugs, Norway, Norske Skog Saugbrugs A-rapport no. TAH20201 (confidential).

4) Hauge, T.A. and Lie, B. (2000). Stabilization of the Wet End at PM6. Part 2: Introductory Process Description and Modeling, Norske Skog Saugbrugs A-rapport no. TAH20001 (confidential and in Norwegian).

3) Hauge, T.A. and Lie, B. (2000). Simulation of a High-Pressure Electrolyser Unit, Tel-Tek report no. 250210-1 (confidential and in Norwegian).

2) Hauge, T.A. and Lie, B. (2000). Strategies for Pressure Control of a High-Pressure Electrolyser Unit, Tel-Tek report no. 250169-1 (confidential and in Norwegian).

1) Hauge, T.A. and Lie, B. (1999). Modeling and Parameter Estimation for a Dow Laboratory Polymer Reactor, Tel-Tek report no. 250137-4 (confidential).

Populærvitenskaplige artikler:

Lie, B., Hauge, T.A., and Dueñas Diez, M. (2002). Trenger avanserte etterlikninger, Teknisk Ukeblad, No. 07, 2002, p. 22-23

Del/Tips: